 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky Barrier Diode RB162L-60 Applications General rectification Dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 2.0 Features 1) Small power mold type. (PMDS) 2) High switching speed 3) Low forward voltage Construction Silicon epitaxial planer PMDS Structure Taping dimensions (Unit : mm) Absolute maximum ratings (Tl=25C) Parameter Symbol Repetitive peak reverse voltage VRM Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature VR Io IFSM Tj Tstg Conditions D0.5 Direct voltage Glass epoxy substrate mounted R-road, 60Hz half sin wave 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C Limits 60 60 1.0 20 150 -40 to +150 4.2 Unit V V A A C C Electrical characteristics (Tj=25C) Parameter Symbol Forward voltage VF Reverse current IR Conditions IF=1.0A VR=60V Min. - Typ. 0.54 4 Max. 0.65 100 Unit V A www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.A RB162L-60 Electrical characteristics curves 1 Tj=150C REVERSE CURRENT : IR(A) 10000 100000 Data Sheet 1000 Tj=150C Tj=125C f=1MHz CAPACITANCE BETWEEN TERMINALS : Ct(pF) 100 FORWARD CURRENT : IF(A) Tj=125C 1000 Tj=125C 100 0.1 Tj=25C Tj=25C 10 Tj=25C 10 1 0.01 0 100 200 300 400 500 600 700 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 0.1 0 10 20 30 40 50 60 1 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 550 FORWARD VOLTAGE : VF(mV) 100 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Tj=25C IF=1.0A n=20pcs Tj=25C VR=60V n=20pcs 200 190 180 170 160 150 AVE : 168.0pF 140 130 120 110 Tj=25C f=1MHz VR=0V n=10pcs 540 530 520 510 500 490 480 VF DISPERSION MAP AVE : 515.2mV REVERSE CURRENT : IR(A) 10 AVE : 6.0A 1 IR DISPERSION MAP 100 Ct DISPERSION MAP 120 RESERVE RECOVERY TIME : trr(ns) Ifsm 1cyc 30 Tj=25C IF=0.1A IR=0.1A Irr=0.1*IR n=10pcs 100 PEAK SURGE FORWARD CURRENT : IFSM(A) ITS ABILITY OF PEAK SURGE FORWARD CURRENT : IFSM(A) 100 Ability 80 8.3ms 20 60 AVE : 80.8A 40 10 Ratings Ifsm 8.3ms 8.3ms 1cyc 10 AVE : 11.6ns 20 0 IFSM DISRESION MAP 0 trr DISPERSION MAP 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 1000 ELECTROSTATIC DISCHARGE TEST ESD(KV) Ifsm PEAK SURGE FORWARD CURRENT : IFSM(A) Ability 100 t 30 TRANSIENT C/W) THAERMAL IMPEDANCE : Rth ( No break at 30kV 25 1000 Rth(j-a) On glass-epoxy substrade soldering land 2mm 2 100 Rth(j-l) 10 Rth(j-a) On glass-epoxy substrade soldering land 10mm 2 1 20 15 10 AVE : 5.0kV 10 Ratings 5 1 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100 0 C=200pF R=0 C=100pF R=1.5k 0.1 0.001 0.01 0.1 1 10 100 1000 ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.A RB162L-60 0A 0V t 1.8 1.6 Io VR 0A 0V Io t 0A 0V Data Sheet Io t 1.8 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) VR=30V T Tj=150C On glass-epoxy substrate soldering land 2mm D=0.8 1.8 D.C. 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 half sin wave D=0.5 D=0.8 VR D=t/T VR=30V T Tj=150C On glass-epoxy substrate soldering land 10mm VR D=t/T VR=30V Tj=150C D.C. 1.6 1.4 1.2 1 0.8 T 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 30 60 D.C. D=0.5 D=0.8 half sin wave 0.6 0.4 0.2 0 D=0.5 half sin wave 90 120 150 0 30 60 90 120 150 0 30 60 90 120 150 AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) 1.4 D.C. 1.2 D=0.8 AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) CASE TEMPARATURE : Tl(C) Derating Curve"(Io-Tl) FORWARD POWER DISSIPATION : Pf(W) 1 D=0.5 0.8 half sin wave 0.6 0.4 0.2 0 0 0.3 0.6 0.9 1.2 1.5 1.8 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.02 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RB162L-60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |